Advantages of a light body is very small
LED lights are very small, very fine LED chip package in the transparent epoxy inside, so it is very small, very lightweight, in the production and application can save a lot of material and space.
Advantages II, energy consumption is very low
LED lamp operating voltage is generally only 2 ~ 3.6V, working current as long as 0.02 ~ 0.03A. That is: it consumes no more than 0.1W of electricity, the consumption of electricity than the same luminous incandescent lamp to reduce more than 90% Lamps are reduced by more than 70%. So, only the LED is called a real energy-saving light source!
Advantages three, strong and durable
LED chips are completely encapsulated in the epoxy resin inside. Small epoxy resin particles extremely difficult to break, the entire lamp body is not loose part; inside the chip extremely difficult to break, but also little heat and may volatilize, fuse. These features make LED difficult to damage. Compared to ordinary light bulbs, fluorescent lamps, LED can be described as impregnable, solid countless times, durable countless times.
Advantages of four, LED lamp long life
In the appropriate current and voltage, LED lamp life of up to 100,000 hours, that is, the theoretical life of products for more than 10 years, compared with other types of lamps have a longer life.
Advantages of five, safe low voltage
LED lights using low-voltage DC power supply (AC current rectifier can be DC), the supply voltage between 6 ~ 24V, due to different products vary. In short, it uses a more secure DC power supply than high-voltage power supplies, especially for home and public places.
Advantages of six, a wide range of applications
Due to the small, each unit LED chip is 3 ~ 5mm square or round, it is more suitable for the preparation of complex modeling process devices. Such as the manufacture of soft, flexible lamp, light belt, shaped lights, the current only LED suitable.
The advantages of seven, more richer colors
Before the market, the color of the lamp is very simple, in order to achieve the purpose of color, one in the lamp surface paint or cover the colored film, and second, in the lamp filled with inert gas glow, so the richness of color has been limited. LED is a digital control, light chip can now send a variety of colors, including red, green and blue ternary, it is
with this ternary color, through the system control, you can restore the colorful world of colorful.
Advantages of eight, less heat dissipation
LED is a more advanced cold light source, it is not like incandescent, fluorescent light as a lot of infrared and ultraviolet radiation, especially for cultural relics, jewelry, high-end cosmetics and other valuables lighting. Almost no incandescent lamp that the current thermal effect, will not be affected by the thermal expansion and contraction of the bubble. Will not make the bulb yellow, will not make the lamp accelerated aging, will not constitute a greenhouse effect on the surrounding environment.
Advantages of nine, less environmental pollution
LED for the protection of the environment mainly in three aspects:
First, there is no metal mercury hazards. LED lights which do not like the use of fluorescent lamps as high-risk mercury, there will not be bulb manufacturing process or damage may leak mercury ions, phosphor and other public hazards.
Second, the manufacture of LED epoxy resin is an organic polymer compounds, after curing has a good physical and chemical properties, the wafer, metal bonding strength, hard and flexible, the majority of the solvent and the stability of salt, not easy to damage , Even after damage
or aging can also be recycled, will not cause pollution to the environment.
Third, LED lamps and display the layout of the particles, the resulting light is generally scattered, little light pollution.
The advantages of ten, more cost savings
Compared to incandescent, fluorescent lamps, LED lamps, the purchase price is higher. However, due to the LED energy consumption is particularly low, in the long term can save a lot of electricity, you can save the input of the lamp, so the cost of comprehensive use more cost-effective.