LED Microwave Motion Sensor panelwith 18W, 36W,40W,40W ※Features: Microwave Motion Sensor Dim LED Panel is a new product series of Luxsky Lighting, which not only keeps the traditional panels' brightness, functions and features, but also the following nice features: 1.Make the functions of...
LED Microwave Motion Sensor panelwith 18W, 36W,40W,40W
Microwave Motion Sensor Dim LED Panel is a new product series of Luxsky Lighting, which not only
keeps the traditional panels' brightness, functions and features, but also the following nice features:
1.Make the functions of microwave motion sensor, daylight sensor and LED driver together;
2.Special design makes LED driver suitable to fix within LED Panel and tri-proof light;
3.Detection area, time delay & daylight threshold can be precisely set through DIP switch;
4.Automatic switching and dimming based on motion & light level;
5.Install method: suspended/ceiling mounted/recessed;
6.With TUV CE, RoHs, FCC approval, 3 years' warranty.
Motion sensor dim LED Panels are mostly used for the places:
1.Office lighting for office and meeting rooms,
2.Public lighting for class rooms, reading rooms,
3.Commercial lighting for supermarket assistant lighting,
4.Residential lighting: villa.
Wall mounted way(m) Ceiling mounted way(m)
Installation height: 1-2M Installation height: 3-6M
※Motion Sensor panel Specification:
|Part No.||CCT||Size L*W*H||Power||Lums||Dim Sensor||CRI||PF||IP rate|
※Motion Sensor panel Functions:
1. "Off"&"On" function Application:
"Off "when enough lighting "On "when no enough lighting Dimming after holding time
if no motion to be detected
2. "Three-Step" dimming function Application:
"Off "when enough lighting "On "when no enough lighting 20% or 35% brightness LED Panel will be offs after
after hold time if no detection standy-by time without person
※Motion Sensor Parameters:
Detection Zone Max.(D*H): 16m*6m;
Detection Sensitivity: 10%/50%/75%/100%;
Holding Time: 10s/90s/3min/10min;
Corridor Function: 0s/30s/10min/+ ;
Daylight Sensor: 5lux/16lux/50lux/disable;
Stand-by Dimming Level: 20%/35%;
Motion Detection: 0.5-3m/s;
Mounted Height: Max. 6Meters;
Detection Angle: 360 (ceiling installation);
Working Temperature: -20 C-50 C
Ip Rate: IP20
※Setting for LED Motion Sensor:
1. Detection area can be reduced
by selecting the combination on the
DIP switches to fit for precisely each
2. According to the time period, LED Panel
remains 100% brightness after motion is
3. Sensor can be set to only allow the panels to light below
a defined ambient brightness threshold.
When set it to be Disable mode, daylight sensor will switch
on the panel; when motion is detected regardless of ambient light level.
50lux: twilight operation, 15lux, 5lux: darkness operation only.
( Stand-by Period)
4. According to time period, Led panel keeps a low light
level before it completely switches off when person
leaves for a long time.
When set"+∞ ", the low light is maintained until motion
is detected. When set "0s", the light will turn off after
Stand-by dimming Level
5. The low light level that you want
after no person is there for a long time.
If you're going to wholesale the white aluminum profile led microwave motion sensor panels 18w/6w/40w/48w light with tuv ce& rohs made in China, welcome to contact our manufacturers and suppliers. We have introduced advanced equipment and technology into our factory to better serve you.